ddg51级咨询nr 07-93武器控制系统-近距离武器系统(wcs-ciws)数字接口rmks /1。本咨询的目的是提供有关wcs / ciws数字接口问题的信息。本建议适用于DDG 51 - 53。ddg54和follow将在建造期间接受ciws计算机程序升级，以解决以下所述问题。2.背景。wcs / ciws界面的测试显示了一个与ciws武器控制组(wcg)计算机程序加载有关的问题，在下列条件之一下执行:答:如果WCS处于在线状态并正在执行，并且ciws的计算机程序被重新加载，并且ciws的远程控制面板(rcp)被设置为远程宙斯盾(自动设计启用亮白和在rcp控制中的ciws)， ciws将不会与WCS通信。B.如果在ciws程序重新加载后，ciws的RCP设置为远程宙斯盾，ciws将向WCS报告“待命”模式，即使实际模式是“空备”或更高。在上述两种情况下，WCS计算机将处于非战术状态和不可用状态。 IN THIS CASE, WCS CANNOT DESIGNATE A TARGET TO CIWS UNLESS BATTLESHORT IS ENABLED AT THE COMPUTER PROGRAM INTERFACE SUPERVISION (CPIS) SUBMODE. THE RCP WILL SHOW CIWS ALIGNED TO ACCEPT WCS DESIGNATIONS, BUT THE MSS AND AAWC CROS WILL INDICATE CIWS IS NOT AVAILABLE FOR DESIGNATION. THIS PROBLEM WILL BE CORRECTED BY INSTALLATION OF THE CIWS USN 1005 (BLOCK 1 BASELINE 0 DASH 5) COMPUTER PROGRAM SCHEDULED FOR RELEASE IN APR 94. THIS PROGRAM INCORPORATES LOGIC WHICH CAUSES THE RCP TO INITIATE VALID COMMUNICATIONS WHEN THE CIWS COMPUTER IS RELOADED. AEGIS INTEGRATION IN B/L 4.2.7 (DDG 51 AND 52) AND B/L 5.0 (DDG 53) IS SCHEDULED FOR AUG AND OCT 94 RESPECTIVELY. 3. ACTION. PRIOR TO RECEIPT OF THE NEW CIWS COMPUTER PROGRAM, PERFORM THE FOLLOWING: A. IF THE CIWS COMPUTER IS RELOADED WHILE CIWS IS SET FOR AUTO DESIGNATION, PLACE THE RCP "RCP/LCP" KEY SWITCH IN THE "LCP" POSITION. FOLLOWING THE COMPLETION OF THE COMPUTER PROGRAM RELOAD, WHEN THE SYSTEM IS IN "AIR READY" MODE, PLACE THE KEY IN THE "RCP" POSITION. THIS ESTABLISHES WCS/CIWS INTERFACE COMMUNICATIONS. B. IF THE WCS COMPUTER IS BROUGHT ON-LINE FOLLOWING A CIWS COMPUTER PROGRAM RELOAD, PLACE THE RCP "RCP/LCP" KEY SWITCH IN THE "LCP" POSITION. WHEN WCS IS ON-LINE AND EXECUTING, PLACE THE KEY IN THE "RCP" POSITION. THIS ESTABLISHES WCS/CIWS INTERFACE COMMUNICATIONS. 4. FOR COMNAVSURFLANT/COMNAVSURFPAC - RECOMMEND TASK DDG 51 - 53 TO ADHERE TO THE PROVISIONS OF PARA 3 ABOVE. 5. FOR NWSCDD (CODE N21, N25) - SCHEDULE CIWS USN 1005 COMPUTER PROGRAM INSTALLATION AS SOON AS POSSIBLE AND NOTIFY ORIG BY MSG WHEN CIWS USN 1005 PROGRAM HAS BEEN INSTALLED IN DDG 51 - 53. 6. THIS ADVISORY HAS NO IMPACT ON EOSS, CSOSS, PMS, FMP, TEST PROCEDURES OR TECHNICAL DOCUMENTATION. IT WILL BE CANCELED WHEN THE CIWS USN 1005 COMPUTER PROGRAM HAS BEEN INSTALLED IN DDG 51-53. 7. POINT OF CONTACT IS MR. N. S. SMITHSON, PMS400F511, DSN: 332-5981 (EXT 133) OR COMM (703) 602-5981. TECHNICAL POC IS CDR J. WILSON, PMS400B30A, DSN: 332-7090 (EXT 222) OR COMMERCIAL (703) 602-7090.//
ddg 51